From 701f672fdf7438c69636bf2526d89feba3fa27b5 Mon Sep 17 00:00:00 2001
From: taylorbourne <taylorbourne@me.com>
Date: Wed, 26 Feb 2020 16:10:45 -0800
Subject: [PATCH] Update readme and docs, remove tvh stuff (I wont use it)

---
 README.md  |  5 +++++
 cronjob.sh | 61 ++++++++++--------------------------------------------
 2 files changed, 16 insertions(+), 50 deletions(-)

diff --git a/README.md b/README.md
index b7591e2..33675b6 100644
--- a/README.md
+++ b/README.md
@@ -32,6 +32,10 @@ Please note that this Docker is configured to run in host mode. Once the Docker
 | /tmp/xteve     | /tmp/xteve/                         |
 | /TVH           | /mnt/user/appdata/tvheadend/data/   |
 
+## Hosts file
+
+In order to properly play streams from Lazystream you must update your hosts file. Please follow the steps on this page: https://www.reddit.com/r/LazyMan/wiki/hostsfile
+
 ## guide2go
 
 If you have an existing guide2go setup you may copy the `.json` files into the path mounted at `/guide2go`. Otherwise run the following command and follow the on-screen steps
@@ -44,5 +48,6 @@ Simply run the cronjob file inside the Docker container
 
 # Credits
 
+Lazystream – @tarkah
 xTeVe and guide2go – @marmei
 Original author of the xTeVe/guide2go Docker – @alturismo
diff --git a/cronjob.sh b/cronjob.sh
index 2e7423e..3aa6265 100644
--- a/cronjob.sh
+++ b/cronjob.sh
@@ -5,29 +5,26 @@ echo "Running scripts..."
 use_xTeveAPI="yes"
 use_embyAPI="no"
 use_plexAPI="no"
-use_TVH_Play="no"
-use_TVH_move="no"
 
 ### List of created lineup json files in /guide2go
-# sample with 3 jsons lineups, adjust to yours
+# Exmaple with 3 lineups
 JsonList="CBLguide.json SATguide.json SATSport.json"
 
-### to create your lineups do as follows and follow the instructions
+### to create your lineups run the below command and follow the on-screen instructions
 # docker exec -it <yourdockername> guide2go -configure /guide2go/<lineupnamehere>.json
 
-### xTeve ip, Port in case API is used to update XEPG
+### xTeVe
 xTeveIP="192.168.1.2"
 xTevePORT="34400"
 
-### Generate playlist and xml data from lazystream
+### Generate playlist and XML data from Lazystream
 echo "Running Lazystream..."
 rm ./playlists/lazystream.m3u
 rm ./playlists/lazystream.xml
-
 lazystream generate xmltv /playlists/lazystream
 
-### Emby ip, Port, apiKey, update ID in case API is used to update EPG directly after guide2go
-# ONLY when xteve API is in use, otherwise obsolete
+### Emby
+# Only necessary if xTeVe API is active
 # API Key, https://github.com/MediaBrowser/Emby/wiki/Api-Key-Authentication
 # embyID, settings, scroll down click API, Scheduled Task Service, GET /ScheduledTasks, Try, Execute, look for "Refresh Guide" ID, sample here 9492d30c70f7f1bec3757c9d0a4feb45
 embyIP="192.168.1.2"
@@ -35,25 +32,14 @@ embyPORT="8096"
 embyApiKey=""
 embyID="9492d30c70f7f1bec3757c9d0a4feb45"
 
-### Plex ip, Port, Token, TV Section ID in case API is used to update EPG directly after guide2go
-# ONLY when xteve API is in use, otherwise obsolete
-# Plex Token, https://support.plex.tv/articles/204059436-finding-an-authentication-token-x-plex-token/
-# plexID, http://YOUR_IP_HERE:32400/?X-Plex-Token=YOUR_TOKEN_HERE , look for "tv.plex.providers.epg.xmltv:  ", sample here 11
+### Plex
+# Only necessary if xTeVe API is active
+# Finding your Plex token: https://support.plex.tv/articles/204059436-finding-an-authentication-token-x-plex-token/
+# Finding Plex ID: http://YOUR_IP_HERE:32400/?X-Plex-Token=YOUR_TOKEN_HERE , look for "tv.plex.providers.epg.xmltv:  " and enter the value blow.
 plexIP="192.168.1.2"
 plexPORT="32400"
 plexToken=""
-plexID="11"
-
-### TVHeadend ip, Port in case m3u Playlist is wanted
-TVHIP="192.168.1.2"
-TVHPORT="9981"
-TVHUSER="username"
-TVHPASS="password"
-TVHOUT="/root/.xteve/data/channels.m3u"
-
-### Copy a final xml (sample xteve) to tvheadend Data ### u have to mount TVHPATH data dir
-TVHSOURCE="/root/.xteve/data/xteve.xml"
-TVHPATH="/TVH"
+plexID=""
 
 # cronjob, check sample_cron.txt with an editor to adjust time
 
@@ -77,21 +63,6 @@ fi
 
 sleep 1
 
-# get TVH playlist
-if [ "$use_TVH_Play" = "yes" ]; then
-	if [ -z "$TVHIP" ]; then
-		echo "no TVHeadend credentials provided"
-	else
-		if [ -z "$TVHUSER" ]; then
-			wget -O $TVHOUT http://$TVHIP:$TVHPORT/playlist
-		else
-			wget -O $TVHOUT http://$TVHUSER:$TVHPASS@$TVHIP:$TVHPORT/playlist
-		fi
-	fi
-fi
-
-sleep 1
-
 # update xteve via API
 if [ "$use_xTeveAPI" = "yes" ]; then
 	echo "Updating xTeVe..."
@@ -105,16 +76,6 @@ if [ "$use_xTeveAPI" = "yes" ]; then
 	fi
 fi
 
-# copy xmltv file to TVHeadend
-if [ "$use_TVH_move" = "yes" ]; then
-	echo "Copying file to TVHeadend..."
-	if [ -z "$TVHPATH" ]; then
-		echo "no TVHeadend Path provided"
-	else
-		cp $TVHSOURCE $TVHPATH/guide.xml
-	fi
-fi
-
 # update Emby via API
 if [ "$use_embyAPI" = "yes" ]; then
 	echo "Updating Emby..."